Fliegen Works Inc.
Aeronautical Engineers – Portland, OR – USA

Fliegen Works is working with Joel Wattum to produce an installation STC kit for the Cessna 170A, 170B, and basic 172 to install Aerocet 2200 twin seaplane floats. Recently we finished up the engineering and flight testing and now have FAA design approval by STC SA02400AK.  Joel is accepting orders.

No tags

Summary: Developed a certification plan for installation of Aerocet 5850 Twin Seaplane Floats on a Dehavilland DHC-2 Beaver Airplane.

Project Name: Aerocet Floats Installation on a DeHavilland DHC-2 Beaver Airplane

Client: Aerocet Inc.

Client Request: To receive a certification plan that would allow them to get an STC for installing Aerocet 5850 floats on a DeHavilland DHC-2 Beaver airplane.

Project Summary: The client designed new composite floats for installation on the DeHavilland DHC-2 Beaver airplane. They asked Fliegen Works to develop a certification plan and checklist to get this installation approved by the FAA. Fliegen Works also performed flight and landing structural loads analysis on the float attachments in order to certify the mounting of the new floats.

Results: Fliegen Works developed a compliance plan and checklist and developed a Maintenance Manual (MM), Instructions for Continued Airworthiness (ICA), and an Illustrated Parts Catalog (IPC). The installation has been approved for an STC.

FAA Approvals: STC for installation of Aerocet Floats on a DeHavilland DHC-2 Beaver airplane.

Beaver on Aerocet 5850 Floats front

 

No tags

Summary: Developed a certification plan for installation of Aerocet 3400A amphibious floats and associated hydraulic equipment on Cessna model C180/185 airplanes. The plan prepared Aerocet to apply for an STC for the installation.

Project Name: Aerocet 3400A Amphibious Floats and Related Hydraulic Equipment on Cessna Model C180/185 Airplanes

Client: Aerocet

Client Request: To receive a certification plan that would allow them to get an STC for installing Aerocet 3400A amphibious floats and related hydraulic equipment on Cessna model C180/185 airplanes.

Project Summary: The client designed new amphibious floats for installation on Cessna C180/185 model airplanes. They asked Fliegen Works (under its former name of Volant Technica) to develop a certification plan and checklist to get this installation approved for an STC.

Results: Fliegen Works developed a certification plan for the amphibious floats installation which was used to successfully receive an STC for this installation.

FAA Approvals: STC for installation of Aerocet 3400A amphibious floats on Cessna model C180/185 airplanes.

STC Project: Aerocet 3400 Amphib Floats on a Cessna 206

STC Project: Aerocet 3400 Amphib Floats on a Cessna 206

No tags

Hosting by Poifoot.com